Search
Close this search box.

How To Blow Up an Air Mattress Without A Pump?

Are you planning to go camping, but suddenly realized that you forgot the air pump for your mattress? Or maybe you have an unexpected guest, but no extra bed to offer? Fret not, because there are alternative ways to blow up an air mattress without a pump.

Air mattresses are great for providing a comfortable sleeping surface, whether at home or outdoors. However, without a pump, it may seem impossible to inflate them. Luckily, there are simple hacks that you can use to get the job done.

In this article, we’ll talk about some clever ways to blow up an air mattress without a pump. Whether you’re in the middle of a camping trip or need an extra bed for your guests, these techniques will come in handy. So sit tight and get ready to learn some new tricks!

Table of Contents

How to Blow Up an Air Mattress with Easy Home Tools

So, you are at home and have this air mattress that’s been lying there for the past week. The pump is broken, and you need to figure out how to inflate it. Let’s now look at the tools you have at home that you could use to blow it up.

The Vacuum Cleaner

Vacuum Cleaner

Did you never think you would use your vacuum cleaner to blow up an air mattress? But it can happen, it’s the most unconventional way to do it, but it’s undoubtedly one of the most practical. So, let’s walk you down the steps that’ll help you do the trick:

  1. Before you begin, make sure your vacuum is clean. To do this, remove the dirtbag or container and run the vacuum for a few seconds without it to clear out any debris from the hose.
  2. If you have a nozzle specifically designed for hard-to-reach spaces, use that. If not, attach the hose to the inflation valve without any additional attachments. You may need to adjust the hose or purchase an adapter to get a secure fit.
  3. Lay the airbed flat on the floor so that it inflates evenly.
  4. Connect the vacuum hose to the inflation valve, and turn on the exhaust mode. If your vacuum has adjustable airflow, start with the lowest setting and gradually increase it to avoid putting too much pressure on the seams of the mattress.
  5. Wait until the mattress is fully inflated, remove the hose and close the valve.

The Hair Dryer

Hair Dryer

Have you been using a hairdryer to do your hair every morning? Why not give it a try to inflate your mattress too? But before you try it, be sure to follow the following steps:

You may need to use an adapter or create your own to seal the connection between the hairdryer and the inflation valve. One option is to use the vacuum nozzle or wrap a paper sheet around the hairdryer to form a cone shape that fits into the valve.

To avoid damaging the airbed, make sure to use the cooling feature of your hairdryer. If it gets too hot, turn it off and allow it to cool down before continuing.

Practice closing the valve quickly and efficiently to avoid losing the air you’ve worked so hard to blow in. This may require effort, so take the time to get a feel for it.

To inflate the airbed using a hairdryer, follow these steps:

  1. Connect the hairdryer to the inflation valve and turn it on.
  2. Use the high power and cold air settings to blow air into the mattress.
  3. Inflate the airbed to the desired volume, turn off the hairdryer and close the valve.

Leaf Blower

Leaf Blower

You may wonder, “How on earth would you blow up an air mattress with a leaf blower?” Well, it works; you just have to create an unbreakable bond between the mattress and the blower so that once the bed gets inflated, the blower will be blown back along with the mattress, and you’ll have an excellent neat rolled-up mattress in front of you.

Utilize a Manual Pump

Who said manual pumps are useless things? You could blow up your mattress manually, too; all you need is a pump. You may have an old hand pump lying around in your house, or maybe you have a friend willing to lend you a hand.

You can utilize hand, foot, or even bicycle pumps to do the job. Take a look here to see how it’s done:

Hand Pump

“Feeling a little low on air? Don’t worry because the hand pump has got your back!

It may be small, but it packs a punch when inflating those smaller air mattresses or pool inflatables. Just connect it to the valve and let your muscles do the rest – in no time, you’ll have a fully inflated bed ready for a good night’s rest.

Foot Pump

Do we need to inflate something a little bigger? No problem – the foot pump has got you covered.

It may be a bit bulkier, but it’s worth it for its extra power. With just a few pedal pumps, you can quickly inflate a full-sized airbed or even give your small motorboat extra buoyancy. Plus, with minimal labor required, it’s a win-win!

Bike Pump

In a rush to inflate that extra-large airbed? Don’t sweat it – the bike pump has got your back.

It may be on the bulky side, but it’s worth it for its high air output. With just a few strokes of the handle, you’ll have your airbed fully inflated. So give your trusty bike pump a spin and get some well-deserved rest on a fully extended bed.

How to Inflate an Air Mattress Without a Pump With A Garbage Bag?

So you’re out camping, and you just realized that you forgot to bring your pump along with you; what do you do? You use a garbage bag, of course! That’s right, those old trusty bags that you used to use to pack your belongings in can be put to better use than packing your clothes in.

As the lights go out in the wilderness at night, you won’t have to worry about anything or anyone stealing your bag away. All you need to do is put the bag over your head and let the gentle breeze work its magic. But let’s unfold the magic a little more for you.

Feeling a little deflated on your camping trip? Never fear – all you need is a little elbow grease (and a sturdy bag) to inflate your air mattress.

1. First, roll out your mattress and give it a quick once-over for any sharp objects.

2. Then, collect some air in the bag by swinging it around until it inflates.

3. Once you’ve got enough air inside, open the valve on your mattress and place the bag’s open end around it.

4. Secure it with some rubber bands to create a tight seal, then press the air from the bag into the mattress. Gradually increase the pressure to avoid any accidental bag explosions.

5. When transferring all the air from the bag to the mattress, remove the bag and close the valve.

6. Repeat this process until your airbed is fully inflated, and you’ll be ready for a good night’s sleep in no time!

Conclusion

Blowing up an air mattress without a pump may seem daunting, but with the proper techniques, it can be done. The key is to use your breath efficiently, ensuring you lock your lips around the valve and blow into the mattress slowly yet steadily.

With practice and perseverance, you should have no problem blowing up an air mattress without any external pump. Now grab some pillows, sheets, and blankets – it’s time to make your camping trip as comfortable as possible!

Jessica
Author: Jessica

Jessica is a lover of both life and gardening. She loves to share his passion for both on social media. He often posts about his latest gardening projects, as well as tips and tricks for others who might be interested in starting their own gardens. She also frequently posts about the different aspects of his life that he enjoys, from spending time with friends and family to exploring new places.

Keep in mind that we may receive commissions when you click our links and make purchases. However, this does not impact our reviews and comparisons. We try our best to keep things fair and balanced, in order to help you make the best choice for you.

As an Amazon Associate, I earn from qualifying purchases.