Close this search box.

How To Protect a Mattress When Moving

Mattresses are one of the most crucial investments in our home. We spend a third of our lives sleeping, so it makes sense that we invest in a quality mattress. When it comes time to move, protecting your mattress becomes a top priority to ensure you don’t have to buy a new one.

Moving can be a daunting task, but it doesn’t have to be complicated. Protecting your mattress during transport is easy if you follow a few simple steps. In this article, we’ll take you through the essential tips and tricks to keep your mattress in excellent condition during your move.

Table of Contents

How To Protect a Mattress when moving

Purchase a Mattress Bag

Mattress Bags for Moving

The first step to protecting your mattress is to purchase reusable mattress bags. These are typically made of a lightweight, plastic material that can be easily fitted over the mattress. You can find these at most home improvement stores, online retailers such as Amazon.

Be sure to select the right mattress sizes and type – typically you will need one for the mattress and an additional one for the box spring, but double-bagging is also an option if you’d like extra protection. When fitting it onto the mattress, make sure it is completely sealed so that no dirt or dust can enter during transit.

Wrap Your Mattress

Wrapping your mattress is a great way to protect it during a move. It’s important to keep the mattress clean and free of dirt, dust, and moisture. You’ll need to wrap the mattress in plastic sheeting or furniture pads.

You can start by laying down sheets of plastic sheeting on the floor and then carefully place the mattress on top. Wrap each side of the mattress snugly with more plastic sheeting and use packing tape to seal off any creases or edges that may be exposed.

You can also use furniture pads for extra protection. Layer several layers of pads around each side of the mattress and then secure them with packing tape. With these simple steps, you can ensure that your mattress will stay clean and protected throughout your move!

Check the Weather

Before you embark on your move, it’s important to check the weather. Moving in bad weather can be detrimental to your belongings and can cause damage. Make sure to check the temperature for the day of your move and plan accordingly.

If it’s hot, try starting early in the morning when it’s cooler outside and keep breaks short so that your items don’t become overheated from being loaded into a truck. If it’s cold, consider loading items inside the house first before taking them out into the cold temperatures, and make sure all boxes are sealed tightly with packing tape to prevent moisture from getting in. With a little bit of planning, you can ensure that your belongings will stay safe and secure during any move!

Use Blankets Under Mattress

To help protect your mattress, you also can use blankets under the mattress before loading it onto the truck. Place a blanket or two on top of the mattress, then wrap another blanket around it securely. This will help cushion the mattress during transit and prevent any damage from occurring.

If you have more than one mattress, make sure to put each one in its own protective wrapping before stacking them together. This will ensure that no damage is done between them while they are being transported. Once you have successfully loaded your mattresses onto the truck, you can secure them with straps or rope so they don’t move around too much during transport.

Place Mattress Between Furniture

Moving a mattress can be tricky, but you can use it to your advantage when moving furniture. Place the mattress between two pieces of furniture, such as a couch and a dresser. This will not only protect the mattress from scratches and other damage, but it will also help keep the furniture together during transit.

Make sure to secure the mattresses with straps or rope so that they stay in place. This is especially important if you are transporting large pieces of furniture, as they could easily move around or even come apart during transport. 

Additionally, make sure that there is plenty of padding between each piece of furniture to ensure nothing gets damaged during transit. Using your mattress between two pieces of furniture is an easy way to double up on protection while also saving valuable space in a moving truck.

Important Tips about Protect Your Mattress when Moving

Moving can be a stressful process, so it’s important to know the right tips and tricks to make it go smoothly. Here are some of the most important tips you need to know when moving:

Air out your mattress upon arrival

Once you’ve reached your destination, the next step is to air out the mattress. This is an important part of protecting your mattress when moving, as it will ensure that no moisture or dirt has been transferred onto it during transport.

In order to air out the mattress, remove it from any packaging material and set it in direct sunlight or near an open window for a few hours. This will help remove odors and freshen up the mattress before you add sheets and linens. You can also sprinkle baking soda on the mattress and wait a few hours before vacuuming it up for extra freshness.

If necessary, you can use a spray disinfectant to further sanitize the surface of the mattress. Wait for it to dry completely before adding any linens or pillows.

Pack your sheets last during the move process

It is important to pack your sheets last. This will help prevent them from getting wrinkled during the entire moving process. Wrinkles can be annoying and hard to remove, so packing your sheets at the end of your items can save you time and effort when unpacking at your new home.

To make sure the sheets don’t get wrinkled in transit, fold them tightly with a layer of tissue paper or other protective material between each sheet. You should also place heavier items like books or appliances on top of the folded sheets so that they don’t shift during transport. Packing your sheets last will ensure that they arrive in pristine condition, making it easier to make up your bed upon arrival at your new home.

Keep the box spring covered

It is important to keep your box spring covered in order to protect its coils from exposure. If your box spring is not covered, it can be damaged during the move process. To ensure that your box spring remains protected, wrap it with a quilt or blanket before moving it. Doing this will also provide extra protection against scratches and dents while loading and unloading the box spring.

You can Place any linens or bedding on top of the box spring will help keep it clean and free from dirt and dust. When movers are handling the mattress, you should cover it with a quilt or blanket as well to protect the coils from exposure.

Make sure you have enough help when lifting up your mattress

lift up the mattress

Moving a mattress can be very difficult and dangerous, especially when you are lifting it up or down stairs. That is why it is important to make sure that you have enough help when lifting your mattress. It is not recommended to try and lift it by yourself as this could lead to injury. Make sure you have at least two people with you when moving the mattress, and that everyone involved knows how to lift properly. Always hold the mattress close to your body and make sure that your feet are shoulder-width apart for good balance before beginning the lift.

Communicate clearly with everyone involved in order to avoid any miscommunication or accidents during the move. With enough help and proper lifting techniques, you can successfully move your mattress without any harm coming to it or anyone else.

Transport memory foam mattresses flat

When it comes to memory foam mattress, they should always be transported lying flat. This will help preserve the shape of the mattress and ensure that all of its inner parts remain undamaged. To do this, you’ll need a large enough vehicle to fit the mattress in without folding or bending it. If this is not possible, wrap the mattress with blankets or sheets and secure them with straps and tape to keep them in place.

It’s also important to avoid loading other items on top of the mattress. Instead, load everything else first and then slide the mattress into the top of the truck or van, supporting it with boxes or other items if necessary. Be sure to use plenty of padding when doing so to ensure that no damage occurs during transport.

Avoid transporting a mattress on the roof of a car

We don’t recommend transporting the mattress on the roof of a car. Not only does this pose a safety risk for passengers and other drivers, but it can also cause serious damage to the mattress itself.  Because the mattress will be exposed to wind and other elements, which can change its shape and reduce its lifespan. Additionally, without proper securing straps and padding, there is an increased chance of the mattress flying off during transit.

To avoid this issue altogether, we recommend using a rental truck or van that allows you to securely place the mattress inside or hire a professional moving company who have experience in transporting mattresses safely. If you do choose to use your own vehicle, make sure you take all necessary precautions when loading and unloading your mattress to ensure that no damage occurs during transit.

Consult the manufacturer's website

Consulting the manufacturer’s website is also a great choice. Their website always provide detailed instructions on how to properly transport and store the mattress during a move. It may also have information on what type of mattress cover or pad to use while moving the mattress.

If you are unsure of any specific steps you should take, you can always contact customer service and ask for their advice. With modern mattresses ranging from memory foam to hybrid models, it is important to follow the manufacturer’s guidelines for proper care during a move. 

Use a mattress protector to keep your mattress clean

mattress protector

You can also use a mattress protector to keep your mattress safe. Mattress protectors come in all shapes and sizes, from fitted sheets to larger covers that can be placed over existing sheets. They help prevent the development of dust mites and allergies by blocking out dirt, debris, and dander. Additionally, they are lightweight and easy to clean; simply take them out of the dryer before they’re completely dry or put them in a warm water bath for about five minutes then hang them over your shower curtain rod to finish drying.

Protecting your mattress with a protector will ensure it remains in good condition throughout its lifetime and continues providing you with optimal comfort and support during your move.


How do you disinfect a mattress after moving?

Disinfecting a mattress after moving can be a challenging task, but there are several options you can consider. The first step is to vacuum the mattress thoroughly to remove any dust or debris. Once this is done, you can apply a disinfectant spray or solution to the mattress.

There are many disinfectants available in the market, but you should choose one that is safe for use on fabrics and mattresses. You can also use a steam cleaner to disinfect the mattress, as the high temperature helps kill bacteria and germs. It is essential to let the mattress dry completely before using it again. 

How can I protect my mattress without plastic?

There are a few natural alternatives that may work for you. One option is to use a soft, breathable fabric like cotton or bamboo as a mattress cover. These materials are gentle on your skin and do not contain the chemicals that often come with plastic materials.

Another option is to use a wool pad, which can absorb moisture and wick it away from your body, keeping you cool and dry while protecting your mattress. Alternatively, you could use a mattress protector made from natural materials like hemp, which is resistant to bacteria and fungi and is machine washable. Whichever option you choose, make sure it is comfortable and fits snugly to provide the maximum protection for your mattress.

Why is my mattress sagging after I move it?

Your mattress may be sagging after you move it because it has lost its shape and support over time, or due to the way it was moved. Mattresses are designed to fit specific bed frames, and moving them improperly can result in bending or damaging their support systems.

If your mattress is older, it may have worn out and lost its firmness, which can cause sagging. Another possible factor could be the quality of the mattress or the materials used to make it, which could affect its durability and longevity.

To address the issue of sagging, you may want to consider investing in a new mattress or seeking professional help to repair or replace its support system.


Keeping mattress to safety is essential for maintaining its quality and longevity. This post will provide you with valuable tips and solutions to ensure your mattress is properly protected while in transit.

By following these guidelines, you can ensure a hassle-free move and enjoy a comfortable sleep in your new home.

Author: Jessica

Jessica is a lover of both life and gardening. She loves to share his passion for both on social media. He often posts about his latest gardening projects, as well as tips and tricks for others who might be interested in starting their own gardens. She also frequently posts about the different aspects of his life that he enjoys, from spending time with friends and family to exploring new places.

Keep in mind that we may receive commissions when you click our links and make purchases. However, this does not impact our reviews and comparisons. We try our best to keep things fair and balanced, in order to help you make the best choice for you.

As an Amazon Associate, I earn from qualifying purchases.